CATALOGUES - Automatic Upper and Lower Hydraulic Rectification Device

Automatic upper and lower hydraulic rectification device

1.Overview

 HCYYJP Upper hydraulic rectification device          HCYYJP lower hydraulic rectification device

There is the function of upper and lower training roller and the unique hydraulic correction function in the middle device of the hydraulic automatic belt rectification device, so it has the high efficiency correction speed.Automatic detection at this time to correct deviation, so that the belt is always in a reasonable state of operation, thus eliminating due to the improper installation of belt conveyor, operation failure, special impact, load changes, uneven belt elongation rate between the sections and so on.

The hydraulic automatic belt alignment device is a self-aligning friction rotation generating power, so no power, automatic adjustment, automatic correction, with a simple structure, reliable performance, easy installation and other features, adopts the fully closed structure, so it can work normally under any conditions.

2、Working Principle

Two vertically-mounted drive wheels are arranged at the same height on both sides of a set of aligning idlers on the frame. The drive axle is connected with oil pump power input shaft. Fix the left and right inspection wheel and oil pump on the self-aligning roller bracket with two fixed brackets, The tail of the compound cylinder is hinged with the fixing bracket, The piston rod of the composite cylinder is connected with the rotating part of the roller support of the aligning roller.Connect the oil port of the oil pump and the end of the compound cylinder with the oil pipe.

When the belt deviates to the left, touch the oil pump on the left side of the left inspection wheel to quickly output the pressure oil,

and the oil manifold integrated block of the compound oil cylinder enters the rodless cavity of the oil cylinder to push the piston and the piston rod; The hydraulic oil with rod cavity is returned to the tank of the oil cylinder by the oil circuit integration block,

The piston rod popped out quickly, Push the aligning roll clockwise (i.e. the left side of the aligning roll forward) to drive the belt to the right and center.

When the belt running deviation to right will touches the right test drive wheel, Right side pump output pressure oil, The manifold block through the compound cylinder enter into the oil tank of the cylinder, Piston rod quickly retracts, Pulling the counter-clockwise rotation of the aligning roller (deflection of the aligning roller) drives the right side of the fixing bracket of the aligning roller to set the compound cylinder belt to the left side and center.

3、 Product model description

The model selection is mainly based on the belt width of the belt conveyor. such as the hydraulic rectifying device has a bandwidth of 1400mm, the hcyyjp-s-14 sweeper is selected.

Performance characteristics：

1. All components have low work load, short working hours and long working life.

Sensitive reaction, high correction efficiency,
 As long as the belt runs off and touches the inspection wheel, the belt automatic correction device will work immediately, making the aligning roller rotate at an Angle, and the belt will be corrected quickly.

very important aligning roller positioning function
Self-aligning force is automatically generated on the belt after the self-aligning idler rotates. At the same time, the belt has a reaction force on the aligning idler. This force makes the aligning idler reversely reset.

Can be used in explosion-proof, dusty, humid, high temperature applications
No electricity and electrical control components, suitable for underground and inflammable, explosive and other high-risk environment.

2. No need to maintain, the belt without any damage, universal parts, easy to replace

The lower deviation correction can protect the belt from sagging, And the accuracy after correction can reach ±5%

4、Technical Parameters：
　　Cylinder pull  ：800kg
　　Cylinder thrust：1176kg
　　Piston rod stroke：150mm
　　Pump flow：5ml/r
5、Applicable conditions：
　　Width of belt：650mm-2200mm
　　Frame form：Rigid frame
　　Roller angle ：Various slot angles

HCYYJP-S/X-B The max installation distance of hydraulic Deviation correction device （m）- reference